Raleigh’s Only Certified Grip-Tite® Foundation Systems Authorized Installer Dealership
The Raleigh/ Durham area is known to have soil that shifts and changes overtime, the moisture and soil composition in our area in some cases allows foundations to shift thus causing foundations and footings to sink and move.
Are you noticing any of the below with your home or commercial building?
Signs of Foundation Failure
Windows and doors are sticking and hard to open
Multiple nail pops are appearing in ceilings and walls
Sticking Doors Settlement
There are large gaps in window and door frames
Window and/or door trim are developing spaces
Floors are starting to settle and become uneven
Bowed or leaning basement walls
Cracks in your foundation walls
Interior plaster walls are cracking
Chimneys are tilting or leaning
Foundations are sinking
Cracks in your basement walls
By utilizing the Grip-Tite® foundation system we can eliminate these problems and put your home back on a firm and stabilized surface that you can give you peace of mind.
We provide the following services for clients in the Raleigh, North Carolina area when it comes to Foundations and Basements.
A home is usually the biggest investment a person or family makes – not to mention the value of the possessions contained within it. A cave-in can cause irreparable damage to the house and contents making it important to secure, stabilize and correct deteriorating basement walls — before it’s too late.
Bowed, cracked or leaning basement walls are a sign that something is going very wrong with the structural integrity of your property. This issue happens when hydrostatic pressure from too much water building up against the walls, or the soil that is around your property swells and exerts pressure that forces the foundation wall inward.
In the past homeowners had few choices for repairing foundation walls, except to excavate around the wall or build a new basement wall. This solution is expensive, time consuming, and destructive to landscaping. Not only that , the problem can recur if the wall is not properly rebuilt or if steps are not taken to correct the causes of the initial deterioration.
Grip-Tite® Wall Anchor System Is the Solution!
The Grip-Tite® Wall Anchor System utilizes proven engineering methods to secure and stabilize deteriorating basement walls. What’s more, the system works on any kind of basement wall – concrete block, clay block, poured concrete, timber, or stone.
The system consists of an interior wall plate, an exterior soil anchor, commonly referred to as a “deadman anchor” and a connecting steel rod to stabilize foundation walls by counteracting pressure exerted against the wall.
The system is a property owner’s alternative to completely removing and rebuilding basement walls that have become cracked, leaning or bowed as a result of pressures exceeding the allowable design capacity of the wall.
Grip-Tite® Wall Anchors are spaced in different locations along a wall and rod extenders can be used to avoid decks, flowerbeds and other landscaping.
Installing the Grip-Tite® Wall Anchor System usually takes less than one day, and the technicians will leave your home and lawn as it was before the installation. Anchors are placed in specific locations along the wall, and rod extenders can be added to avoid all decking, cement work, flower beds, and other landscaping. And because the system works with the wall and ground, structural changes to your house are unnecessary.
Whether the cracking or bowing is caused by hydrostatic pressure, expansive soil or another problem, don’t risk the investment in your home by failing to address the issue.
Minimal excavation or disturbance to property, lawn or landscaping.
Installed in a day or less.
No wait ‘ can be installed year-round.
Easily installed in areas with decks, landscaping or flowerbeds.
Cost-effective ‘ less cost than re-building foundation wall(s).
Helical piers (also known as helical piles) are used to repair an existing structure and also for new construction in place of micropiles, caissons, geopiers or other deep foundation systems. They can also be used instead of an over- excavation. The helical pier can be both time and cost effective.
When helical piers are used to repair an existing structure, they are “screwed” into the soil until a pre-determined torque is reached. A bracket is then placed on the steel shaft and positioned under the footing of the structure, transferring the load of the structure to the helical piers. The structure can then be stabilized or lifted back level.
Helical Piers have been in use for almost 200 years, and more recently have become more popular with engineers and contractors and used often in place of more costly alternatives.
What is the best solution for your foundation settlement, bowed walls, sagging floors, sinking slabs, or other foundation repair needs?
Grip-Tite® Foundation Systems!
We can say this because we have been delivering on a promise of celebrated quality and service in the foundation repair and earth anchoring industry for more than 94 years. It’s the little things that matter that you will benefit from our unmatched experience and the exceeding attention to detail that our dealers put into every foundation repair job.
Why are more and more homeowners choosing us for their foundation repair needs? Because it is not easy finding the right foundation contractor, but you will find that Grip-Tite® Authorized Dealers adhere to some very basic rules of honesty, integrity, responsibility and respect.
If you are looking for the highest quality foundation repair products with the most cost-effective solutions then you have found it. Contact us today for a FREE estimate.